Back

2022 John Deere 1580

RENTAL LOW HOURS
MoreLess
Limited Time Offer!

Selling Price -$39,999.00
No Images Available

Selling Price -

$39,999.00

HD Certified Pre-Owned
  • Width:72 in
  • Engine Type:Diesel
  • Drive Type:AWD
  • 2022
  • John Deere
  • 1580
  • Base
  • General
  • Model: 3TNV88C
  • Gross PS: 37.4 hp (27.5 kW)
  • 3,000 rpm
  • Three
  • 100.2 cu in. (1.64 L)
  • At 1,950 rpm: 80.4 lb-ft (109 Nm)
  • Liquid
  • Dual element dry type
  • Diesel (B20 compatible)
  • Direct
  • Speed and direction control: Two-pedal foot
  • Hydrostatic full time 4WD, on-demand
  • Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
  • Internal wet disk
  • Drive: 26x12-12 | Caster: Flat free, 11x4-5
  • Steering: 20x10-10
  • 12 V
  • 75 amp
  • Automotive type
  • Blade tip: 18,000 fpm (5,486 m/min) | range: 0-15 mph (0-24 km/h) | Hi forward: 0-15 mph (0-24 km/h km/h)
  • 6.3 U.S. gpm (23.8 L/min)
  • Open center | Spool valve: Front lift, standard | Lift cylinders: Two
  • 7 gauge / 0.18 in. (4.6 mm)
  • Mower deck Size: 60 or 72 in. (152 or 183 cm)
  • 49.2 in. (125 cm)
  • 7 in. (17.8 cm)
  • Less mower deck: 86.7 in. (220.2 cm)
  • 55.5 in. (141 cm)
  • With ROPS: 83.7 in. (213 cm) | with ROPS folded: 59 in. (150 cm)
  • Cutting: 1-6 in. (2.54-15.24 cm)
  • Rear discharge: 62, 72 in. (157, 183 cm)
  • 16 U.S. gal. (60.6 L)
  • 8 U.S. qt (7.6 L)
  • Net weight without mower or fuel: 2,120 lb (962 kg)
  • Belt tensioning: Spring loaded
  • Mower decks: One-piece stamped steel; 7-Iron PRO
  • 24 months
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $39,999.00
  • Pacific Junction
  • Pre-Owned
  • 252907
  • 2022
  • John Deere
  • 1580
  • 1TC1580VTNS080023
  • Model: 3TNV88C
  • 248
  • Hydrostatic full time 4WD, on-demand
  • Diesel (B20 compatible)
  • Available
  • Cutting: 1-6 in. (2.54-15.24 cm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.