Specifications: 1025R available from AgriVision Equipment

ManufacturerJohn Deere
Model 1025R
Manufacturer Yanmar 3TNV80
Engine power (gross), hp (kW) 24.2 (17.8), PS
PTO power - Gear transmission, hp (kW) ---
PTO power - Hydrostatic transmission, hp (kW) 18 (13.4) per SAE
Rated engine speed, rpm 3200
Type Diesel
Operating range 1575-3370
Aspiration Natural
Cylinders/displacement, cu in. (L) 3 / 68 (1.115)
Cylinder liners Cast-In-Block
Bore and stroke, mm (in.) 76x82 (2.99x3.23)
Compression ratio 23.5:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dry type with safety element
Engine shutoff Key switch
Engine torque @ rated speed, lb-ft (N/m) 40.7 (55.2)
Fuel tank capacity (open-station; cab), U.S. gal. (L) 5.6 (21.2)
Type 12V
Battery size (CCA) 500
Alternator (12-V), amp 40
Starter size, hp (kW) 1.6 (1.2)
Type Diesel
Injection pump type Indirect Injection
Consumption at 100% load, U.S. gal./hr (L/hr)* 1.4 (5.3)
Fuel consumption rate should be used for comparison purposes only. ---
Standard transmission; forward/reverse Hydrostatic - 2 range
Optional transmission; forward/reverse ---
Left-hand reverser No
On-the-go shifting (yes/no/partial) N/A
Direction reverser; forward/reverse No; Twin Touch Pedals
Final drive Spur gear
Brakes Wet disk (left hand pedal)
Steering Power
Clutch, wet/dry N/A
Clutch disk diameter wet clutch, in. (mm) ---
Drawbar tongue weight capacity, lb (kg) ---
Axle capacity (in operation) ---
Front, lb (kg) 1253 (568)
Rear, lb (kg) 2078 (942)
Creeper No
Type Open Center
Pump rated output, gpm (L/min) 6.3 (24)
Steering 2.8 (10.8)
Implement 3.5 (13.2)
Pump type Gear
Maximum operating pressure (psi) 2000
Draft control type Position Control
Remote control valves available 2
Type Limited Cat. 1
Lift capacity, 24-in. behind link arms, lb (kg) 681 (309)
Lift capacity at lift link ends, lb (kg) ---
Standard Rear @ 540; Mid @ 2100
Optional ---
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Fuel tank, gal. (L) 5.6 (21.2)
Cooling system (includes coolant bottle), qt (L) 2.9 (2.7)
Crankcase with filter, qt (L) 3.9 (3.7)
Transmission and hydraulic system gear, gal. (L) ---
Transmission and hydraulic system hydrostatic, gal. (L) 3.25 (12.3)
Front axle gearcase (MFWD axle), gal. (L) .625 (2.5)
Type Spur Gear
Engage on-the-go rear differential lock Yes
Rollover protection structure OSHA, SAE, ASAE, EEC
Type Foldable
Platform - Flat/straddle One-piece semi flat
Gear shift location - Console/floor Left Hand Side
Compliance ---
Visibility ---
Air conditioning, temperature differential ---
Doors ---
Platform type ---
Noise rating ---
Seat suspension system ---
Wheelbase, in. (mm) ---
Front tread range, in. (mm) ---
Rear tread range, in. (mm) ---
Minimum rear tread setting, in. (mm) ---
Front axle clearance, in. (mm) ---
Turning radius with brakes, ft (m) ---
Turning radius without brakes, ft (m) ---
Unballasted operating weight, lb (kg) ---
Approximate shipping weight (open-station; cab), lb (kg) ---
Wheelbase, in. (mm) 57.1 (1450)
Front tread range, in. (mm) 36.1 (918)
Front axle clearance, in. (mm) 7.7 (195)
Turning radius with brakes, ft (m) ---
Turning radius without brakes, ft (m) 7.4 (2.25)
Limited slip differential ---
Unballasted operating weight, lb (kg) ---
Approximate shipping weight (open-station; cab), lb (kg) 1444 (655)
2WD ---
Front ---
Rear ---
MFWD ---
Front 18X8.5-10 R4
Rear 26X12-12 R4
Underhood muffler Yes
Joystick SCV control Yes
Inboard planetary No
Axle type Flanged
Brakes - Type and control Wet Disk