Specifications: 4105 available from AgriVision Equipment

 
ManufacturerJohn Deere
Model 4105
Key Specifications  
Engine Manufacturer Yanmar 3TNV84T-KJT
Electrical Type 12 volt
Fuel System Type Direct injection
Transmission Std. Transmission; Forward/Reverse Hydro, 2-Range
Hydraulics Type Open Center
3-Point Hitch Type Category 1
Power Take-Off (PTO) Standard Rear @ 540
Fluid Capacities Fuel Tank, gal. (l) 10.5 (39.7)
Final Drive Type Spur Gear
Operator Station Rollover Protective Structure ASAE S478
MFWD Dimensions Wheelbase, in. (mm) 68 (1727)
Miscellaneous Underhood Muffler Yes
Engine  
Manufacturer Yanmar 3TNV84T-KJT
Engine HP (kW) - gross 40.5 (29.8) per ISO 97/68/EC
PTO HP (kW) - Gear transmission ---
PTO HP (kW) - Hydrostatic transmission 32.5 (24.2) per SAE
Rated engine speed, rpm 2800
Operating range 1000 - 2975
Aspiration Turbo
Cylinders/Displacement, cu. in. (liters) 3 / 91.5 (1.5)
Cylinder Liners Cast-in-block
Bore and Stroke, mm (in.) 84x90 (3.3x3.54)
Compression Ratio 19:01
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dry-type with safety element
Engine Shutoff Key switch
Engine Torque @ rated speed, ft./lb. (N/m) 59.2 (80.3)
Fuel Tank Cap., US Gal. (L) (Open; Cab) 10.5 (39.7)
Electrical  
Type 12 volt
Battery Size (CCA) 500
Alternator (12 volt, amp) 40 amp
Starter Size, hp (kW) 1.9 (1.4)
Fuel System  
Type Direct injection
Injection Pump Type In-line with electric shutoff
U.S. gal./hr (L/hr) @ 100% load* 2.35 (8.9)
*Fuel consumption rate should be used for comparison purposes only. ---
Transmission  
Std. Transmission; Forward/Reverse Hydro, 2-Range
Opt. Transmission; Forward/Reverse ---
Left-Hand Reverser No
On-The-Go Shifting (Yes/No/Partial) No
Direction Reverser; Forward/Reverse Yes; Twin Touch Pedals
Final Drive Spur gear
Brakes Wet disk
Steering Power steering
Clutch; Wet/Dry ---
Clutch Disk Diameter, in. (mm) wet clutch ---
Drawbar Tongue Weight Capacity, lb. (kg) 882 (400)
Axle Capacity (in operation) ---
Front, lb. (kg) 1587-3197 (720-1450)
Rear, lb. (kg) 4000 (1815)
Creeper No
Hydraulics  
Type Open Center
Pump Rated Output, gpm (L/min.) 14.8 (56.2)
Steering 5.7 (21.6)
Implement 9.2 (34.7)
Pump Type Dual gear
Maximum Operating Pressure (PSI) 2500
Draft Control Type Position control
Remote Control Valves Available 2
3-Point Hitch  
Type Category 1
Lift Capacity (24-in. behind link arms), lb. (kg) 2200 (999)
Lift Capacity @ lift link ends, lb. (kg) 2530 (1149)
Power Take-Off (PTO)  
Standard Rear @ 540
Optional ---
Control Independent
Clutch Wet disk
Brake (for Mid and Rear PTO) N/A
Fluid Capacities  
Fuel Tank, gal. (l) 10.5 (39.7)
Cooling system (includes coolant bottle), qt. (l) 5.6 (5.3)
Crankcase with filter, qt. (l) 4.5 (4.3)
Transmission and Hydraulic System, gal. (l) gear ---
Transmission and Hydraulic System, gal. (l) hydrostatic 6.8 (25.7)
Front Axle Gearcase (MFWD axle), gal. (l) 1.2 (4.5)
Final Drive  
Type Spur Gear
Engage On-the-Go Rear Differential Lock Yes
Operator Station  
Rollover Protective Structure ASAE S478
Rigid - Foldable - Telescopic Rigid
Platform - Flat/Straddle Semi-flat
Gear Shift Location - Console/Floor Left Side
Cab  
Compliance ---
Visibility ---
Air Conditioning, Temperature Differential ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions  
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions  
Wheelbase, in. (mm) 68 (1727)
Front Tread Range, in. (mm) 51.2 (1300)
Front Axle Clearance, in. (mm) 14.7 (373)
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) 9.5 (2.89)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 2987 (1355)
Standard Tires  
2WD ---
Front ---
Rear ---
MFWD ---
Front 10-16.5 R4 / 8-16 R1--
Rear 17.5L-24 R4 / 14.9-24 R1
Specifications are based on published information at the time of publication.Specifications are subject to change without notice.  
 
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States.In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.