The John Deere quick-change attachment carrier allows one person to quickly change attachments without the use of tools.
With the bucket level or slightly rolled back, simply remove the retaining pins and place in storage position.
Roll the attachment forward to disengage the lower pins.
Lower the attachment to the ground to disengage the top hooks.
To install another attachment simply reverse these steps.
|Select up to 4 models to compare specifications|
|Front tire||7.5-16 6 PR R1|
|Rear tire||13.6-28 6 PR R1|
|Front axle configuration|
|Pump capacity||11.4 gpm|
|Rated pressure||2828 psi|
|Bucket used||1850 mm|
|Bucket weight||159 kg|
|Lift capacity at full height||Measured at pivot (U)|
2453 lbMeasured at 800 mm ahead of pivot (V)
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W)|
3236 lbMeasured at 800 mm ahead of pivot (X)
|Boom breakout force||Measured at pivot (Y)|
4775 lbMeasured at 800 mm ahead of pivot (Z)
|Bucket rollback force capacity||At maximum height (VV)|
2248 lbAt ground-level line (ZZ)
|Dimensions||Maximum lift height (A)|
114 in.At full height - bucket level(B)
106 in.At full height - bucket dumped (C)
|Overall length (I+F), ft (m)||3.68 m|
|Overall height in carry position (J)||1.442 m|
|Digging depth (H)||75 mm|
|Reach||At maximum height (D)|
26 in.At ground level - bucket level (F)
|Bucket angle||Dump angle, degrees (E)|
57 degree (angle)Rollback angle, degrees (G)
23 degree (angle)