2018 John Deere 2330

Selling Price -

$109,500.00

40'4" 4B ST Harrow with rolling basket

Information

  • Size:39 ft
  • 40'4" 4B ST HARROW W/R BSKT

Photos

Highlights

  • $109,500.00
  • Leon
  • Pre-Owned
  • 505967
  • 2018
  • John Deere
  • 2330
  • 1N02330XCJ0775141
  • Available

Specifications

  • 2018
  • John Deere
  • 2330
  • Base
  • Cultivator
  • 6 to 10 mph (9.7 to 16 km/h)
  • Operating: Up to 6 in. (152 mm)
  • Requirements: 10-14 hp per ft (24.5-34.2 kw/m)
  • Center frame tires on Walk-Over™ tandem wheels: 21 ft, 9 in. (6.6 m): (4) IF280/70 R15 134D tires | 24 ft, 9 in. to 33 ft, 9 in. (7.5 to 10.3 m): (4) IF320/70 R15 144D tires | 38 ft, 3 in. to 44 ft, 3 in. (11.6 to 13.5 m): (4) VF285/70 R19.5 150D tires | 50 ft, 3 in. to 56 ft, 3 in. (15.3 to 17.1 m): (4) 440/65 R18 159A8/B tires | Wing frame tires on Walk-Over™ tandem wheels: 21 ft, 9 in. (6.6 m): (4) 11L-15 FI LR D tires | 24 ft, 9 in. to 33 ft, 9 in. (7.5 to 10.3 m): (4) 12.5-L-15 FI LR D tires | 38 ft, 3 in. to 56 ft, 3 in. (11.6 to 13.5 m): (8) 12.5-L-15 FI LR D tires
  • SIZES: 3-section: 25 ft, 6 in. – 42 ft, 6 in. (7.62 – 7.8 m) | 5-section: 38 ft, 3 in. – 56 ft, 3 in. (11.7 – 17.2 m) | CLEARANCE Fore-aft: 134 in. (3.4 m) | Underframe: 24 in. (610 mm) | DISK GANGS: 20x0.197-in. (508x5 mm) low-concavity disk blades spaced 7.25-in. (184 mm) apart | Standards: TruPosition™ with 200-lb (91-kg) trip force and 8-in. (203-mm) spring-reset trip height | Shanks: 0.75x1.75x24 in. (19x44x610 mm) | Sweeps: 10-in. (254 mm) Perma-Loc™ in base, Tru-Width™ | Spacing 9 in. (228 mm) split-the-middle |
  • Center frame: 10 ft (3 m), Rank tubes: 4x4 in. (102x102-mm) Mainframe fore-aft tubes: 3x8 in. (76.2x203 mm), Wing fore-aft tubes: 3x6 in. (76.2x152 mm)
  • 3-section: from 10 ft, 3 in. to 15 ft, 6 in. (3.1 to 4.7 m) | 5-section: from 11 ft, 6 in. to 16 ft, 0 in. (3.5 to 4.9 m)
  • 3-section: from 13 ft, 6 in. to 14 ft, 4 in. (4.1 m to 4.4 m) | 5-section: from 15 ft, 1 in. (4.6 m)
  • Level-lift™ 6x10-in. (152x254-mm) T-hitch, cast-steel hitch link, optional rear hitch
  • Depth control: Base equipment: TruSet™ in-cab depth/pressure control and single-point depth control DISK GANGS: hydraulic gang-height adjustment with 8-in. (203 mm) range and combination scrapers are standard | PROFINISH LEVELING SYSTEM: 5-bar coil-tine harrow (base): 6-bar spike-tooth harrow | 3-bar coil tine with round-bar rolling basket: 4-bar spike tooth with round-bar rolling basket | 3-bar coil tine with flat-bar rolling basket: 4-bar spike tooth with flat-bar rolling basket