2019 John Deere 730FD

Selling Price -

$69,500.00

Dual knife drive, Crary air reel with spare motor for it, Flip over reel, Spare draper belt.

Information

  • Platform size:30 Feet
  • Platform Kind:Flex/Draper
  • Options:Flip Over Reel
  • Options:Wind System Filter
  • Dual knife drive
  • Poly tine pickup reel

Photos

Highlights

  • $69,500.00
  • Macedonia
  • Pre-Owned
  • 516619
  • 2019
  • John Deere
  • 730FD
  • 1H0730FDTK0805266
  • Available
  • Side belts: 101.6 cm 40 in. / Center belts: 177.8 cm 70 in.
  • Clean Cleats: 19.05 mm 0.75 in.

Specifications

  • 2019
  • John Deere
  • 730FD
  • Base
  • Grain Carts
  • 6-70 rpm | Knife: 490 cycles/min | Side belts: variable up to 228 m/min 748 fpm | Center belts: 211 m/min 692 fpm | Feed drum: 234 rpm
  • Control: Hydraulic | Draper belts: Hydraulic from cab (side belts only)
  • Pickup reel diameter: 106.7 cm 42 in. | Feed Drum: 414 mm 16 in. | Feed drum fingers: 16 mm 0.625 in. | Finger Reach: 152 mm 6 in.
  • 9.14 m 30 ft
  • Base: hydraulic, maximum tilt 9 degree (angle)
  • Reel range: 185 mm 7.3 in. / Total range: 251 mm 9.9 in. | Reel fore and aft Cylinder range: 359 mm 14.1 in. / Total range: 616 mm 24.3 in.
  • Side belts: 101.6 cm 40 in. / Center belts: 177.8 cm 70 in.
  • Clean Cleats: 19.05 mm 0.75 in.
  • Platform: 9.9 m 32.4 ft
  • Overaal Operating With dividers: 2.74 m 9.0 ft
  • field position: 10.27 m 33.7 ft
  • Approximate (pickup reel): Single knife drive: 3,206 kg 7,609 lb Dual knife drive: 3,344 kg 7,373 lb
  • Platform Type: Flex cutterbar draper | Knife drive Base: dual knife | Cutterbar Type: Straight-line knife drive system | Number of slats: Six bat poly base | Height control: Hydraulic | Number of fingers: 20 | Auger finger platform: Dual chevron, retracting | Header height sensing Type: Electrohydraulic
  • nylon