NEW, 22 In. x 0.256 In. Wavy Front and Rear, Single Point & TruSet Depth and Pressure Control with Side-to-Side Leveling, TruSet Gang Angle Control, Hitch Link for Tractors with Category IV Thin Rated Drawbars, Radial Flotation Tires on Mainframe and on Wing Frames, TruSet Fore/Aft Control, TruSet Active Hydraulic Stabilizer with Radial Tires, TruSet Hydraulic Wing Control, Hydraulic Knife Edge and Round Bar Double Rolling Basket
MoreLess
Limited Time Offer!
Selling Price -$163,018.00
- 33 Ft. 10 In
- 22 In. x 0.256 In. Wavy Front and Rear
- Single Point & TruSet Depth and Pressure Control with Side-to-Side Leveling
- TruSet Gang Angle Control
- Radial Flotation Tires on Mainframe and on Wing Frames
- TruSet Fore/Aft Control
- TruSet Active Hydraulic Stabilizer with Radial Tires
- TruSet Hydraulic Wing Control
- Hydraulic Knife Edge and Round Bar Double Rolling Basket
- NEW
- 2023
- John Deere
- 2660VT
- Base
- Disc
- Horsepower requirement: 24.5-34.25 engine kW/m (10-14 engine hp/ft)
- 8-10 mph (12.9-16.1 km/h) / Up to 8 mph (12.9 km/h) in rocky conditions
- Blade spacing: 7.25 in. (18.4 cm) | Gang angle: 0-12 degrees | Commander™ blade diameter: 22 in. (55.9 cm) / Commander™ blade thickness: 0.256 in. (6.5 mm) | Underframe clearance: 12 ft (3.66 m)
- Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.) / Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.)
- Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.) / Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.)
- Without rear hitch Three-section: 33 ft (10.06 m) / Five-section: 40 ft (12.19 m)
- 4 in. (10.16 cm)
- Per blade: 260 lb (117.9 kg)
- Rolling basket: Double Rolling basket, Reverse Knife edge, followed by round bar or flat bar rolling basket
- 0
- $163,018.00
- Red Oak
- Pre-Owned
- 456077
- 2023
- John Deere
- 2660VT
- 1N02660VCP0800331
- Available