2025 John Deere 1585 TerrainCut™ 72 in. 7-Iron™ PRO side discharge
- Year 2025
- Make John Deere
- Model 1585 TerrainCut™
2025 John Deere 1585 TerrainCut™ 72 in. 7-Iron™ PRO side discharge
TerrainCut™ Front Mower7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck
Integrated ComfortCab
Diesel Engine
Compatible with select front blade, snow blower and broom attachments
Features may include:
- Diesel engine has high-quality features to minimize operating cost
- The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
- These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
- The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20. The 1550 model requires an optional kit to be compatible with B20 biodiesel fuel.
- Key features of the engine include:
- Economical cast-in block cylinder design for good cooling and long life
- Indirect fuel injection (1550)
- Direct fuel injection (1570, 1575, 1580, 1585)
- Injects fuel directly on top of pistons for more efficient combustion
- Delivers more horsepower per gallon of fuel
- Improves starting
- Develops more horsepower per gallon of fuel and improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C) (optional engine coolant heater attachment assists starting under more extreme conditions)
- Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
- Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Enclosed engine compartment to keep out debris and lower sound levels
- Sealed radiator compartment to keep trash and debris on outside of hood
- Excellent torque for plenty of lugging power when operating in tough mowing conditions
- Full-pressure lubrication for positive lubrication, even when operating on slopes
- Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
- 90 percent to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Progressive-type air restriction indicator to let operator know when the filter needs servicing
Engine
							Engine Manufacturer
							3TNV88C
						
						
							Engine Power
							Gross: 27.5 kW (37.4 hp )
						
						
							Cylinder Liners
							3
						
						
							Rated Engine Speed
							3,000 rpm
						
						
							Displacement
							1.64 L (100.2 cu in)
						
						
							Engine Torque
							At 1,950 rpm: 109 Nm (80.4 lb-ft )
						
						
							Fuel System
							Diesel (B20 compatible)
						
						
							Cooling System
							Liquid
						
						
							Air Cleaner
							Dual element dry type
						
						Drivetrain
							Transmission
							Hydrostatic full time 4WD, on-demand
						
						Wheels & Tires
							Tires, Front Specification
							Drive wheels: 26x12-12 | Caster: Flat free, 11x4-5
						
						Electric
							Electrical
							Baterry: 12 V
						
						
							Alternator
							95 amp 
						
						
							Operating Speed
							Blade tip: 18,000 fpm 5,486 m/min | range: 0-24 km/h (0-15 mph)
						
						Hydraulics
							Hydraulic Flow
							23.8 L/min ( 6.3 U.S. gpm)
						
						Dimensions
							Dimensions
							Mower deck Size: 183 cm (72 in)
						
						
							Ground Clearance
							17.8 cm (7 in. )
						
						
							Deck Thickness
							7 gauge: 4.6 mm (0.180 in)
						
						
							Wheelbase
							125 cm (49.2 in. )
						
						
							Overall Width
							147 cm (58 in)
						
						
							Overall Height
							with ROPS: 216 cm (85.2 in)
						
						
							Length
							Less mower deck: 220.2 cm (86.7 in)
						
						
							Height
							Cutting: 2.54-15.24 cm (1-6 in)
						
						Capacities
							Fuel Capacity
							Tank: 60.6 L (16 U.S. gal)
						
						
							Cooling
							9.5 L (10 U.S. qt )
						
						Weights
							Weight, As Shipped
							1,176 kg (2,593 lb)
						
						Features
							Features
							Spool valve: Front lift, standard | Lift cylinders: Two | Type: Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
						
						
							Construction Material, Deck
							One-piece stamped steel; 7-Iron PRO
						
						Warranty
							Warranty
							24 months
						
					 
			 
			