2025 John Deere 220R MSL Base

Information

2025 John Deere 220R MSL

  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Quik-Change bucket system allows fast attachment changeovers
  • Mechanical Self-Leveling (MSL) Loader option with 1,377 lb (626 kg) lift capacity

Features may include:

Quik-Park™ loader mounting system

The 220R loader is designed to easily attach to and detach from the tractor without tools.

The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

Quik-Change attachment carrier

The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground.

This CUT Carrier is base equipment on the 120E and 120R loaders.

To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier.

Then install the retaining pins and the carrier is ready to work.

This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.

A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Photos

Highlights

  • Clarinda, Iowa
  • 2025
  • John Deere
  • 220R MSL Base
  • Available
  • Clearance at full - bucket dumped: 1667 mm (66 in.) | Reach: At maximum height 756 mm (30 in.) / At ground level - bucket level 1351 mm (51 in.)

Specifications

  • 2025
  • John Deere
  • 220R MSL
  • Base
  • General
  • 2032R, 2038R
  • 23x8.50-14 4PR R4
  • 14-17.5 6PR R4
  • Loader raise, seconds 3.19 seconds / Loader lower, seconds 1.94 seconds / Bucket dump, seconds 4.76 seconds / Bucket rollback, seconds 2.91 seconds
  • Boom breakout force: Measured at pivot 886 kgf (1949 lbf) / Measured at 500 mm ahead of pivot 618 kgf (1360 lbf) | Bucket rollback force capacity: At maximum height 1044 kgf (2297 lbf) / At 59-in. (1500-mm) lift height 1302 kgf (2864 lbf) / At ground-level line 972 kgf (2138 lbf)
  • 20.2 L/min (5.3 gpm)
  • Rated pressure: 17.23 MPa (2499 psi)
  • Bucket used: 1450 mm (57 in.) | Dump angle, degrees: 36 degree (angle) | Rollback angle, degrees: 34 degree (angle) | Bucket angle: Dump angle, degrees 36 degree (angle) Rollback angle, degrees / 34 degree (angle) Dump angle, ground / 115 degree (angle)
  • Clearance at full - bucket dumped: 1667 mm (66 in.) | Reach: At maximum height 756 mm (30 in.) / At ground level - bucket level 1351 mm (51 in.)
  • Maximum lift height 2160 mm (85 in.) / At full height - bucket level 1999 mm (79 in.) / At full height - bucket dumped 1667 mm (66 in.)
  • 3076 mm (121 in.)
  • 1725 mm (68 in.)
  • Digging: 149 mm (6 in.)
  • At full height: Measured at pivot 509 kg (1120 lb) / Measured at 500 mm ahead of pivot 365 kg (803 lb) | At 59 in. (1500 mm): Measured at pivot 589 kg (1296 lb) / Measured at 500 mm ahead of pivot 445 kg (979 lb)
  • Base: 330.9 kg (729 lb) | Bucket: 88 kg (194 lb)