2022 Westfield MKX2 Auger 1685

Information

2022 Westfield MKX2 Auger 1685

The MKX2 has been designed to withstand all the wear and tear a farm can throw at it. The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

The new open discharge spout allows for a more efficient flow out of the tube moving grain quickly with up to 20% less power.

Responsive steerable axles have been added to smoothly maneuver around the yard and make lining up with the bin hole easier than ever.

Photos

Highlights

  • Clarinda, Iowa
  • 2022
  • Westfield
  • MKX2 Auger 1685
  • Available
  • Lowered: 12'-7" (3.8 m) | Halfway: 33'-4" (10.1 m) | Raised: 47'-3" (14.4 m) | At Liftarms: 23'-8" (7.2 m) | At Wheels: 28'-7" (8.7 m)

Specifications

  • 2022
  • Westfield
  • MKX2 Auger
  • 1685
  • General
  • Shaft: 50E double CV with 2-bolt shear
  • Hp Required (With Dry Wheat): 150 - 175 hp
  • 22.5" (57.2 cm) agricultural tires
  • Thread: 148" - 182" (375.9 - 462.3 cm)
  • Lift: 2" (5.1cm) x 4 1/2" (11.4 cm) cylinder with 3/8" (1 cm) cable
  • Psi Required To Raise Auger: 1800 psi (124.1 bar)
  • Reach Lowered: 46' (14 m) | Reach Halfway: 43'-4" (13.2 m) | Reach Raised: 39'-10" (12.1 m) | Reach Liftarms: 26'-4" (8 m) | Reach to Wheels: 31'-9" (9.7 m)
  • Low Profile Hopper Dimensions: 68" (172.7 cm)
  • Low Profile Hopper Dimensions: 46 1/2" (121.9 cm)
  • Low Profile Hopper Dimensions: 11" (27.9 cm)
  • 15' 6" (4.7 m)
  • Lowered: 12'-7" (3.8 m) | Halfway: 33'-4" (10.1 m) | Raised: 47'-3" (14.4 m) | At Liftarms: 23'-8" (7.2 m) | At Wheels: 28'-7" (8.7 m)
  • Tube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technology: 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Speed Reducer Gearbox: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
  • 8-bolt agricultural type